Steps to attach weddings ribbons to BMW F33 and F83 convertibles:

  1. Put the roof all the way down

  2. Open the bonnet by pulling the level in driver footwell gently but firmly TWICE 

  3. Cut 2 x 2.5m approx ribbons (I’ll try to have done this and the next step)

  4. Attach 3cm of double-sided tape to same side of both ends of 2 x 2.5m ribbons (pictured)

  5. Attach to underside centre of bonnet using double-sided tape (pictured)

  6. Close bonnet firmly

  7. Pull down sun visors, stick to car roof under sun-visors, then close them (pictured)

  8. Close roof if needed - will give extra hold - especially if driving at any speed

  9. If roof staying down - you may need extra tape at cabin end of ribbons

  10. Please remove after use and discard

Rolls of reflective strip and a strip of fabric with 'GORELIA' printed on it, placed on a black car seat armrest.
Close-up of a car hood latch area with a purple ribbon tied to the edge, under a tree with blue sky background.
A silver car with a sunroof has a blue ribbon tied across the top of the car, passing over the sunroof. The car is parked outdoors, with several other vehicles visible in the background.
A hand is holding a blue strap labeled 'Gorilla' on the back of a vehicle. The vehicle's interior and rear window are visible, with trees reflecting in the window.
The interior of a car shows a piece of white tape stretched across the dashboard, with the view outside through the windshield of a parking lot and a person walking by.
Inside a vehicle, the dashboard includes a black textured cover taped with gray tape. The view through the windshield shows a white Porsche Macan S and trees outside.
White BMW parked outdoors with reflections of trees and sky on the windshield and hood.
Red BMW M4 sports car with wedding ribbons on a driveway outside a brick house under a clear blue sky.